Sign In | Join Free | My himfr.com |
|
Ask Lasest Price | |
Brand Name : | Lipu |
Model Number : | 2.5×7 |
Certification : | ISO9001:2008,CE,IQNet |
Price : | negotiable |
Payment Terms : | L/C, D/A, D/P, T/T, Western Union, MoneyGram |
Supply Ability : | 30sets/quarter |
Delivery Time : | 15-20 days |
Environmental Protection Industrial Sand Dryer Equipment , Three
Cylinder Dryer
Introduction:
Industrial sand dyer equipment is used for dying materials such as
sea sand, river sand, silica sand. If your material moisture is
20-40%, the final moisture can meet you requirement as your
requirement. The capacity ranges form 1 to 70 t/h. There are two
kinds of dryer for choice: single rotary dryer and three cylinder
dryer.
Features:
1. Three-cylinder dryer can take full advantage of excess heat,
reduce heat loss and increase the heat exchange area, making the
unit evaporation intensity of the dryer greatly improved, thereby
effectively improving the heat energy utilization rate, reducing
the energy consumption and making the heat efficiency of
three-cylinder dryer improved in a wider range. Compared with
single-cylinder dryer with the same efficiency, its heat efficiency
is improved about 50% and energy consumption saving doubles.
2. Because the cylinder length of the three-cylinder dryer is one
third of single-cylinder dryer and the base area saves about 60%
than the single-cylinder dryer, the base investment is reduced
correspondingly.
3. The dryer drives by adopting the friction between supporting
roller and belting leather, and the transmission power is low,
thereby reducing the noises when the equipment working.
4. The cylinder sealing system of the dryer adopts micro-contact
technology, with better sealing effect and reducing the dust
pollution.
5. The cylinder and raising material board of the dryer both adopt
alloy steel plates which is double service life of common steel
plates.
6. Three-cylinder dryer can use coal, oil, gas as fuel, dry
different shapes of material, such as lump, granular, powder and
other various materials.
Technical Data:
Item/Unit/Model | Φ2.5×7m | Φ2.7×7m | Φ3.0×7.0m | Φ3.2×7.0m | Φ3.6×8m |
Diameter of outer cylinder(m) | 2.5 | 2.7 | 3.0 | 3.2 | 3.6 |
Length of outer cylinder(m) | 7 | 7 | 7.0 | 7.0 | 8 |
Cylinder volume( m³ ) | 16.63 | 16.63 | 52.678 | 52.678 | 81.38 |
Rotating speed of cylinder(rpm) | 4-10 | 4-10 | 4 -10 | 4 -10 | 4 -10 |
Initial moisture of slag(%) | 10-12 | 10-12 | 10-12 | 10-12 | 10-12 |
Final moisture of slag(%) | 1 | 1 | 1 | 1 | 1 |
Initial moisture of yellow ground(%) | 8-10 | 8-10 | 8-10 | 8-10 | 8-10 |
Final moisture of yellow ground (%) | 0.5-1 | 0.5-1 | 0.5-1 | 0.5-1 | 0.5-1 |
Highest intake air temperature(℃) | 700-750℃ | 700-750℃ | 700-750℃ | 700-750℃ | 700-750℃ |
Production capacity(T/h) | Yellow sand25-30 Slag20-25 | Yellow sand30-35 Slag25-30 | Yellow sand35-40 Slag30-35 | Yellow sand45-50 Slag35-40 | Yellow sand65-70 Slag60-65 |
Motor type | Y2-132m-4E | Y2-132m-4E | Y2-160m-4 | Y2-160m-4 | Y2-160m-4 |
Motor power(kw) | 7.5×2 | 11×2 | 7.5×4 | 7.5×4 | 15×4 |
Reducer type | XWD7-23-11W | XWD7-23-11W | XWD6-23-7.5KW | XWD6-23-7.5KW | XWD8-23-15KW |
Velocity ratio of reducer | 29 | 29 | 29 | 29 | 29 |
Case:
The Delivery Site of 1.5×15 Rotary Dryer
![]() |